1. When titanium alloy is cut, the deformation coefficient will be less than or equal to 1, and the friction on the surface of the chip is relatively large, resulting in the acceleration of furniture wear.
2. The temperature of titanium alloy cutting is also relatively high, at this time, due to the small thermal conductivity of titanium alloy, the heat generated during processing is not easy to transmit, in general, the heat generated by titanium alloy processing is about twice as high as that of stainless steel.
3. The cold and hard phenomenon produced by titanium alloy processing is more serious, and the chemical activity of titanium alloy is relatively large, and when it is cut at high temperature, it is easy to absorb oxygen and nitrogen to produce a hard skin. In addition, changes in plasticity can also lead to case hardening during cutting. This not only leads to fatigue strength of the parts, but also accelerates the wear and tear of the props.
